My Love of Vintage Sewing Machines

If you follow me on Instagram, you know I have developed a little vintage machine habit. I think I have 10 now, not including my Viking, and I have 3 more on the way. I just can’t leave them to rot in a thrift store, and my husband is more than accommodating, so they come home with me quite often.

I’d like to share the adventure here with anyone curious to follow along with me. There used to be this divide – men would sell the machines and women would sew on them. There’s still some of those residual feelings from those days. Let’s break those down. I don’t care about your gender, if you prefer sewing to mechanics, your flavor of the rainbow – let’s throw all of that out.

I’m not a trained sewing machine mechanic. Actual dealer mechanics have a bit of secret sauce they go off to learn in a special tech class, get all certified, and that is how a dealer can maintain some income. They sell you a machine, the manufacturer shares the service manual, not to be confused with the owner’s manual, and they keep proprietary secrets and charge you for a yearly tune-up.

I get that to a degree. I want my local dealer to thrive, however, even IF I got my hands on the service manual to my Viking Sapphire, I’m not going to crack it open just to see what makes it tick. I’m not willing to risk that kind of investment.

Most importantly, this is more about saving the old girls sent to the boneyard. Many of these are really good machines. We all need a back-up machine, or maybe we only want vintage machines, or even more likely, it’s really cool just to see how things work, amirite?

I wish I had a grandpa that was into sewing machines and repair, but at the same time, I like a little trial by fire, know what I mean? When I was a kid, my parents owned a bowling alley, and my smug-ass thought it wasn’t that hard to be a bowling alley mechanic. Well, now I need to put my money where my mouth is, don’t I? I’m not that smug little brat anymore, but I’ve got some penance owed.

Come on this ride with me. If you know something I don’t, please share. Maybe you’ll have a different experience to share, or a cool memory of one of these machines, or maybe you think I’m off my rocker – that’s cool too.

This Brother Valiant is in bad, bad shape. I pulled a 140/22 sized industrial leather needle out of it. I had to use pliers to yank it out. A lot of people take these old machines and think they’re going to do industrial sewing on them, and just trash them when they find out it doesn’t work that way. Many of them are pretty heavy duty, but that isn’t the same as industrial. I’ve got a neighbor that is in handbag production – she has a walking foot industrial Juki. THAT is the right machine for the needle I yanked out.

I’ve got a few others in various stages. I’m going to try to post the insta-videos here and see if that works. I’ll probably switch to another format when I get it a bit more situated, but let me know what you think. Here’s the pick-up day on the Valiant. Really cool machine. Really abused.

And here’s the revelation that I’m going to have to pull off the wheel, lol.

Have you ever seen one of these machines? I’ve run across a few online, but this is the only one I’ve found that has the Brother name hidden only on the bottom. She’s really quite special looking, I think.

I’d like to give a shout out to Emily Lang. I’ve been collecting and tinkering with these machines awhile now, and she saw I was looking for some pretty specific repair manuals. Emily, out of the blue, offered to help me find them, and sure enough, one of the two is now in my hot little hands. The sewing community, man, can you beat it? So awesome. Thank you, Emily.

Sweat Bees

If you follow my IG account at all, you might know I FUBARed a sports coat peaked lapel pretty good recently. I had to tear out a lot of work. I cried. Ugly cried.

So, I’m back at it. Taking it slower.

At least double welt pockets are easy enough.

I took a bit of a break today. This one had her last immunization today before Kindergarten starts…didn’t even shed a tear. Please make time stop. She’s my last baby.

So we played in the yard. Sprayed each other with the hose. Marveled at sweat bees on a lone surviving sunflower.

This one has even been knocked down by the squirrels too, but keeps on keepin’ on.

That’s kind of how I have to re-approach this lapel again.

Slow, methodical, and enjoy the process. I’m so used to speeeeeeeding through and around everything. I just started liking yoga a couple years ago, but I’m still not going to start paper-piecing quilts anytime soon.

Walk away. Come back. No manic allowed.

Not sure what is going on there….I think these are end of summer males getting a little angsty if I’m reading the wiki right.

I think I might quit Twitter.  It’s exhausting. I can get news and opinion elsewhere….but I feel like I’m in a vacuum, on Twitter, of this hive mind and I’m not sure I want to be in it anymore…there’s no growth there anymore…

I prefer Instagram… for now. Even with their stupid new algorithm. I feel the discussions are more productive. For now.

I’ve also been enjoying my quilt guild more this year than in years past. I think there’s been a refresh in the guild and it’s a more supportive atmosphere than it has been before, whereas other places, like Twitter, feel stagnate and not where I want to be anymore.

There’s my meandering Friday thoughts. And my sweat bees. Kind of a gross name for something so incredibly beautiful.

A Refashion and A Scrap Bust

Two nightgowns based on the Seamwork Savannah pattern, more or less. I’ve been tinkering with the arm/bust area and have narrowed it by about an inch at the top on both sides to prevent the gaping I was getting. I also paid more attention at keeping the bias tape facing taut as I sewed. I added 4 inches to length with some leftover Britex linen I experimented with over-dying.

I also have been getting more comfortable with the knew-to-me rolled hem foot.

I don’t quite have it perfected. This time I hemmed before I put in the French seams – the foot does not like to have bulk of any kind roll through it. It worked a bit better, but I’m not quite there. I’ve got a few warbly spots, and a couple spots where it has rolled back on itself, and at the side seams it’s not quite right. For my 2nd time, I’m pretty happy with it, but will need to practice much more.

Linen & wrinkles. Like peanut butter and chocolate. Not my best dye job either… I over-dyed the Burnside Bibs too after this, learning from this blotchy mess, and they came out almost perfect. I used Rit black, a cup of salt, hot water, and was much more patient with the bibs.

The second is a refashion. My mom loved this nightgown for over 10 years and asked if I could salvage some of it. It really is a very soft cotton. I’m not sure how long it’s going to live after the refashion, but some is better than none.

I started with my Savannah-turned-nightgown pattern. Since it was originally a very full henley nightgown I didn’t think to take in much ease, but that proved to be a mistake. There was a huge gap at the back, even with crisscrossing the straps.

I had already put on the binding. Whoops. In hindsight, I should have made a figure 8 with the binding and straps…Live and learn. HOWEVER. I have an excellent jumping off point to re-draft this as an original design from scratch.

Crappy iPhone photos showing gap-mishap. It was was WAY worse on. Dress form linen is a bit sticky, not slinky, and grip the fabric.

I went with the crisscross straps, then I took my rotary cutter and cut an 8 inch wedge down to zero at the hem, and ran it through the serger.

It’s a little slap-dash, but I feel it has a lot of potential. I really like the back. I’m going to start from scratch next time, but I think I’ve got something here. You can probably visualize better here the figure 8 that the binding and straps should be making, and they’d just cover the back and front binding ends so neatly.

I left the original hem on the knit gown.

I had to cut the binding from the sleeves, so technically the stretch is in the wrong direction, but it turned out great. Really flat and solid.

Overall, I’m happy with my double wearable muslins.

Sewing and Stabilizing Knit Garments

This post first appeared on Britex Fabrics.

It’s almost my favorite time of year: autumn layering time! I looked through the beautiful woven wool fabrics at Britex, but when I saw this raw umber viscose & wool knit, it was love at first sight. I’m not exaggerating when I tell you, if you want it, buy it now. Mark my words, it will sell out.

I know a lot of sewists are scared of knit fabrics. Maybe you think you need a special machine, or special stitches, or some pro-level techniques and materials. I’m here to tell you that all you need is a zig-zag stitch and an iron. I’ve sewn knits on a pre-WWII era machine, and on a modern computerized machine. Knits are easy. For this instructional post, I’ve this easy Aomori Papercut pattern, which also happens to be a perfect transitional fall piece.

I know what you’re thinking, “But Becky, that pattern isn’t listed as easy!” The pattern’s sleeveless version is made for wovens or knits. The sleeved version isn’t even a “set-in” sleeve.

Lesson 1: Put a piece of masking tape on the wrong-side of your cut pieces, and you’ll instantly make this an easy pattern.

Lesson 2: Let’s talk stretch percentage really quickly. This pattern doesn’t list a recommended stretch percentage, it’s that easy, but my advice is 30-50% would be best for the sleeve cuffs and binding. How do you know percentage? Just like anything else, you have the difference in ratio, and multiply by 100. So, if I take 10 inches of the Britex viscose/wool knit, put it next to a ruler, and I can stretch it to 15 inches, my formula is [(15-10)/10)]x100=50%. A=original measurement. B=stretch measurement. B-A to get the difference. Difference of B-A divided by A. Bounce the decimal point to the right twice, AKA multiply by 100. [(B-A)/A]x100=%

Here we have the top in two different fabrics. The Britex viscose/wool (left) and a rayon I had in my stash to make the muslin. You can see how two fabrics make a very different top.

Lesson 3: Stabilize your shoulders. There are a million opinions on what to use to do this and I’m going to tell you to use what you have. I’m not a fan of using clear plastic elastic in my shoulders; I think clear plastic elastic is for swimsuits and occasionally lingerie, but you do you, just stabilize your shoulders. The entire weight of the garment is being held on your shoulders.

Here are 4 stabilizer options, with both an overlocker stitch and a basic zig-zag stitch, and what they look like pressed from the right-side. As you can see, stitch doesn’t change anything drastically, nor does stabilizer preference.

From top to bottom: rayon hem tape, twill tape, clear elastic, light iron-on stabilizer

Pin the stabilizer of your choice on the shoulder seam and sew on together.

Lesson 4: Press and steam with your iron. Do you know any knitters? You know how they “block” their pieces after they’re done? Same idea. You’re creating new fiber-memory for the fabric so that it stays in your new shape. The fabric has been flat on a bolt, and you’re asking it to be 3-dimensional. You need to re-block it. Use steam and an ironing cloth. I use a scrap piece of voile, but Britex has some affordable silk organza that is even better.

When necessary, use a pressing ham. Let each part you press cool in-place before going to the next section to reset the fiber-memory.

If you’re in doubt at all, before pressing the binding on a curve:

After pressing the binding:

If anything, Britex high-quality fabric makes a bigger difference than any technique or equipment used. Get some of the wool/viscose (before I go back and buy the rest of it), and get on to making!

This post was written by me, Becky Johnson of sewbeckyjo.com, for Britex Fabrics. Fabric was provided as compensation, however all opinions, photos, and intellectual content contained herein is my own. The pattern used is my own purchase, and this is not an endorsement, nor was I compensated in using the pattern.

How to Clean Spray Baste or Glue

I’ve written how to clean or remove spray baste gunk before, but since it is one of my most popular posts, I thought it deserved a refresh. This is not a debate on spray baste or spray glue. I love it for making bras and gluing tiny bits of lace to power mesh before sewing, or for stabilizing knit minky to a woven fabric.

Overspray happens. Here’s how we deal.

Clockwise from top left: quilting cotton, sheer poly-lycra-blend hatchi knit, poly minky, linen-cotton blend

Here are a number of fabrics you may be using with spray baste. I first encountered the gunk when making a baby blanket with minky.

Fabric with spray baste gunk

For this tutorial, I sprayed half of each fabric and literally dabbed them with dryer lint to recreate a worst-case scenario. Don’t worry, this will also work if you’ve already washed and dried your item, and your gunk looks like silly putty mated with an old bathrobe.

Use 70% Alcohol

I have both 70% and 99% alcohol on hand. The 99% is to remove gunk from metal on old sewing machines. We are not doing that. We want just enough solvent to remove the glue, but not possibly melt any fibers, if working with poly or elastics. Use 70%. I buy cheap toothbrushes just for cleaning. I suspect that is why there are medium and hard bristle options even after years of our dentists telling us to only buy soft bristles.

non-reactive surfaces

Use non-reactive cups and surfaces. Pour some alcohol into the cup, dip toothbrush into alcohol, and scrub.

spray baste removal

It will take a few dips and some scrubbing, but it is the best method. I’ve tried Simple Green, Biokleen, vinegar, dish soap, crying…nothing else works. Ronsonol lighter fluid or Goof Off would probably work, but I’m not comfortable putting those on fabric, especially when isopropyl alcohol is 99 cents.

Spray Baste Cleaned

After you give it a good scrub, let it dry. Feel it. If any sticky remains, give it a good scrub again with fresh alcohol.

Seamwork Savannah 2

That smile is 100% fake. It’s 106 degrees. I’m born and raised in the Pacific Northwest. We don’t do Arizona temperatures. We don’t even build houses with air conditioning…maybe a heat pump, but unless you’re in some suburb, there’s no AC. Sigh.

I found 3/4 yard of April Rhodes voile at Modern Domestic. I knew I’d try to squeeze an Akita or Savannah out of it, and opted for a 2nd Savannah. My first Savannah is in rayon and I wear the Sydney over it..so I totally forgot about the armpit gaping and didn’t fix it. Life goes on.

I didn’t have enough fabric to quite cut the back on the 45 degree bias, but whatevs. In Portland, most of the time, I’d use this as a layering piece anyway.

Upshot is I can hang my laundry outside and it’s done in 10 minutes…

So…funny thing. My mom saved one of my favorite childhood shirts. This shirt is from Huntington Beach, California, summer of 1988. I wore it proudly in my 8th grade school photos with my perm.

At least I’m consistent.

The label is the best part:

I’m going to go listen to some sexy sax man. Stay cool.

How Do You Choose a Sewing Machine? PART 2 – The Reasoning

PART 1 of this series is information overload, amirite?

If you were to do all the internet searching and talking to all the people, PART 1 is basically what you would find. Now, I’m going to go over some basic issues people have, and the more you pay for a machine, the more of these issues are removed for you, and you can just get to sewing something cool, smooth sailing all the way. The less expensive the machine, the more the tinkering.

In my experience, the biggest frustration people have with their sewing machine, if you ask them, is the tension. Sometimes they’re right…but I find it’s like a catch-all phrase for people to say the tension or the timing is off, which can be an expensive fix if that is really what it is….or at least you’ll get charged for it, take it home, and shocking! You’ll have the same issues!

A few little things.

Thread.

Yes, you gotta use the right thread. You just want to sew something cool, I get it. It seems trivial, doesn’t it?When you’re starting, get 4 spools of Gütermann All Purpose 40wt in light tan, med gray, black, and white. That will blend enough for quite awhile. Worry about the finer details and “correct thread” as you get better.

My cousin called me. She was piecing a quilt and her machine was skipping stitches. Before she went and bought a new machine, she called me to go through everything, inch by inch. The first thing she said was she was using quilting thread. I took that to mean Gütermann, Mettler, or Aurifil 50wt, which is what long time, experienced quilters mean…heh. See my mistake? We then went through everything….and I double checked her thread type and one last time before telling her it was time for a new machine…I asked the BRAND. That’s when she said, “It says ‘quilting thread’ right on it…” OH. A spool of “quilting thread” means a thick, coated, HAND QUILTING thread. I’m not going to reinvent others’ posts on threads and types and whens, but, yeah. It matters.

Just get the 4 to start. That’s like <$8 with a coupon.

Singer Touch & Sew 626

Needles.

I haven’t seen any modern machine that requires a particular brand, nor have I run across a vintage machine that requires any special needles. I’ve used Singer, Klassé, Schmetz, Organ, Inspira…I don’t see a difference. There used to be different lengths/sizes or “Types”…but not anything you’re going to find without an antique dealer is going to require anything other than a basic Type AA needle. I’ve ripped an industrial needle out of a domestic machine. Don’t let anyone shove in an industrial needle…but industrial needles are specialty and you’re not going to find one easily.

DO make sure your needle shank, or the flat side, is facing the right way for your machine.

DO make sure your needle is all the way UP before you tighten down the clamp. This can cause skipped stitches if it is hanging down too low.

DO use the right type of needle for your fabric. Lots of posts out there about that. Start with a Universal 80 for wovens, and a Stretch 75 for knits; go from there.

Bobbins

Bobbins.

You will need to use the bobbins required by your manufacturer. This isn’t the place to save money. If Juki tells you to buy only Juki bobbins, then buy only Juki bobbins. If someone hands you a bunch of Class 15 metal bobbins and some story about how they’re better because they’re metal, but your machine takes plastic Class 15J, use the plastic ones.

The photo above is an open Janome top-loading bobbin case. I bought this machine for $25, and took out the metal Class 15 bobbin, the nest of thread, the tangles, cleaned it, put in the correct plastic 15J plastic bobbin, and now it runs perfectly.

Class 15J and 15

Here I have taken out the bobbin, the bobbin case, and the plate of the 1960s Singer. I want you to see how much of a tight squeeze it is:

The amount of area between the bobbin and the needle is in millimeters. This is how you can have a home sewing machine and not a factory industrial machine. This is also why you want to use the correct bobbin. There’s a millimeter of room between that needle and the outer part of the bobbin rotary mechanism. This goes around at a high speed. Use the correct bobbin.

When putting bobbin in your bobbin case, there are directions on where to pull the thread through. When you do this, hold the bobbin and pull the thread through taught. You’re pulling the thread through the tension spring – which do not look like traditional “springs,” and if you don’t pull it through, the sewing-motions of your machine will not always pull it into correct position for you, and you’ll get skipped stitches/bobbin thread nest. In a metal case, which sits perpendicular to the machine bed, the “spring” is that metal flap:

Some bobbins lay flat to the machine bed. My Janome version easily slips through the “channels” while my Viking needs the thread to “snap” into place. I need to give the thread a little tug…these are all idiosynracies of owning a machine. Add another point to dealer classes from PART 1.

You can PAY more for easier bobbin features. There are machines with bobbin sensors, bobbin thread cutters, separate bobbin motors for winding, auto-tension…or you can be more hands-on. How much money do you want to spend?

I’m not going to get into the housing around it, or shuttle vs rotary shuttle. That’s a bit more advanced. We just want to sew something cool at this point. I’m also not going to get into the bobbin tension – when you’re beginning, don’t mess with the bobbin tension, and it won’t get messed up. The point here is how hands-on do you want to be? The bobbin is the #1 user error. Which brings me to:

User Error

Let’s go through some photos of the thread take up lever and the bobbin case.

For the TOP thread to wrap around the BOTTOM thread and make a stitch, the TOP thread goes down with the needle, gets caught by the bobbin “HOOK”, thereby gets wrapped around the BOTTOM thread, and the needle comes up, pulling it tight to make a full TOP thread revolution AROUND the bobbin CASE and completing the stitch.

Thread the machine and adjust the tension knob when the sewing foot is UP, when foot is down, it engages the tension disks. There are machines with auto tension if you want to pay more. These take away the possible tension frustrations, for a price, and you can just sew.

Take Up Lever, and Tension Knob & Disks

Here is the open bobbin case again, with the bobbin removed, so you can see the relationship between the UPPER thread, the take up lever, and the bobbin:

#1 Beginner error is not taking up that lever ALL THE WAY when you want to stop and pull out your fabric. The thread must finish the revolution around the bobbin, which is missing in this photo so you can see the UPPER thread doing all the work.

Here the UPPER thread popped off the rotary because I took out a few parts, but you can see, the needle is coming up, but NOT up all the way – the UPPER thread is not done:

This is where the lever is positioned at this time:

If you try to take out your fabric at this point as I did MANY times when learning to sew, you will get this…and this is difficult to capture on my camera, but if you see 4 threads coming out the bottom of your fabric, and you can’t quite pull your fabric away…this is why:

The needle is UP and above the raised sewing foot! BUT it is not up ALL THE WAY. See the UPPER thread still wrapped around the bobbin? It’s a bit blurry, but see there looks to be 4 threads under the fabric? See the threads still wrapped around the bottom of the bobbin?

This is user error. This is probably #1 user error. If you don’t make this error, pat yourself on the back. Really. I’ve had countless phone calls and emails with frustrated new sewists and this is the most common issue.

Alternatively, get a machine with a needle up/down button for a price. This error is why the up/down button exists.

Easy Buttons

When I bought my Viking, I had already experienced the older, mechanical version, and the $$$ fancy computerized version. I just wanted to sew, and I knew I was committed to sewing, but I was NOT committed at the time to learning the mechanics of a sewing machine.

For a price, I opted for a few EASY BUTTONS.

I’ve got auto foot pressure, needle AND foot up/down buttons, temporary reverse options, speed options, knot-the-thread-for-me options…because I hated messing with the #1 Error above, and these were the things I wanted after using my mom’s fancy machine. The needle up/down removes #1 Error possibility.

What I didn’t get/couldn’t afford were: Auto-tension, bobbin sensors/cutters, ultra speed, heavy duty, super embroidery, etc. BUT I could just get to sewing cool things quickly and easily.

So, in the car analogy from PART 1, I got a entry model Acura. Once I learned how to drive and drive very well on my Acura, then I branched out and got some old Fords to tinker on. See what I mean? Much like how an entry level Acura isn’t going to go 4×4 driving, my Viking or my mom’s Janome will not sew leather, 4 layers of denim, waxed canvas to leather, and those Sew Sweetness bags I told you about in PART 1? That was an adventure. The computer in high-end machines will shut down your machine if you try to push the motor too hard. 

Tension

A quick word about tension. Sigh. And “timing” for that matter. Yes, timing can get off – the photos above of the UPPER thread making the revolution with the needle – that CAN get out of sync. Tension disks CAN “freeze up,” BUT in all the machines I’ve cleaned, repaired, tinkered with… I’ve adjusted 1 bobbin tension screw. Ever. I have good reason to suspect the previous owner lowered the tension on the bobbin for free motion quilting on a machine that wan’t necessarily built for free motion quilting – and that is a more advanced option when you’re ready.

I’ve “flossed” the tension disks on the GUNKIEST ancient machines that smelled of the worst smells…and have yet to find a “frozen” set. “Tension” and “timing” are often the knee-jerk reactions to simpler user-errors. I’ve had skipped stitches from the needle not being all the way up in the needle-clamp, or the bobbin thread not properly through the tension spring, but never because of timing or actual tension problems.

I’ve never worked on a modern $100-$200 big box store Singer or Brother. Maybe this is where the mysterious tension and timing issues pop up? I don’t know, and I don’t want to know. I want to sew.

Bias

Yes, I have bias from my experience, as you will from yours. This is my 2 cents. I’m not a pro machine tech, nor do I want to be. I want to know enough to make this more approachable for you and enjoyable for me. I read dusty old books, tear apart gross old machines, read up on the latest embroidery software releases, and sew my heart out both for my love of it all and to be a helpful friend to other sewists. Every option has perks and caveats. Like with a car, mobile phone, laptop…anything. Pick what will make you LOVE sewing the most.

Any other questions, or details you want me to get into? Please, let me know. Both of these posts got far longer than I intended, and I’m afraid it’s a sea of word vomit…

How Do You Choose a Sewing Machine? PART 1 – The Options

Are you new to sewing? Looking to buy your own sewing machine? Usually 1 of a handful of things has happened:

  1. You’re inspired to make a quilt for a friend’s wedding or a baby
  2. You’re inspired by fashion (Project Runway, Fashion Week, WWD, Great British Sewing Bee)
  3. COSPLAY! Comic-Con!!! (and related price-shock!!)
  4. You’re tired of clothes not fitting / looking like everyone else / being cheaply made

Welcome to the tribe. We get you.

Now, you’re ready to buy a sewing machine. This is like buying your first car. Do you want easy to drive? Do you want cheap? Do you want cheap to repair? Do you never want repairs? Do you want high resale value? Do you want sturdy? Do you want speedy? Bells and whistles? Just like with a car, these are rarely all the same machine.

You search online for what machine to buy, just like with a car. On Reddit, Facebook, and other social platforms you’ll get 5 people telling you to buy a $100 Brother machine, 2 people telling you to buy a $25 garage sale “all metal machine that will last forever and sew through anything,” and usually 1 person telling you they love their $5 million dollar Bernina. Sound familiar? 5 people telling you to buy a Honda Civic, 2 people telling you to buy an old Ford with a manual transmission, and one person telling you they love their Land Rover.

You just want to make something cool. What do you do? Let’s go through the usual recommended options above, THEN I want to show you something that, unless you have a hands-on mentor, will help you really decide.

Let’s start with Bernina.

  • OMG they’re beautiful and they really do sew very nicely.
  • Dealer support/sales/deals – and Bernina dealers are ONLY Bernina dealers.
  • Metal inside, Swiss engineering, some metal bodies. You can go from a $250 basic mechanical Bernette to full on free arm quilting and embroidery machines that cost more than a down payment on a house.
  • I never see them in thrift shops or garage sales for $25…I never see ancient basic models for less than $500 AKA they keep their value
  • If you get a bad one, repairs are $$$
  • Accessories are $$$
  • Tune ups are $$$
  • The Bernina tribe is strong and LOYAL. Just read comments anywhere and you’ll see what I mean.
  • Some Berninas recently had a software update….ABOVE a price point, while the machines below said price point did not get an update. Not hatin’ just statin.’ When you’re looking at a pretty high beginner buy-in point…it’s something you should know. This is unlikely to be different in any brand, and frankly, we’re not getting into embroidery machines right now, are we? No. So take it or leave it.
  • ***EDITED perk I totally forgot! Dealers will throw in free lessons with a machine – so they’ll train you to use it and maybe even a beginner sewing class too! Work out a deal with them!

Brother, et al.

  • Amazon reviews. Read them. Brother makes killer industrial/semi-industrial machines…you’re not buying one of those or even one made on the same planet.
  • I generally don’t talk about Singers made after 1960…that said, I’ve read from a mechanic that the Heavy Duty model would be a reliable home sewing machine. Not my words; not an endorsement; not an affiliate link.
  • $100 or so is a great starting price point
  • Plastic on the outside and inside – this means plastic gears that will eventually break. Maybe in a month, maybe in 100 years. The Singer in the top photo? Metal gears. Plastic cams (decorative stitch thingies)
  • Fairly universal and economical accessories
  • No dealer guarantees, no discounted service, no free tune-ups for a year
  • Anecdote: Told a friend to buy a Brother to start. Friend made a few quilts and curtains. Friend upgraded from $150 Brother to a $350 metal, mechanical Janome after 3 years. Friend couldn’t BELIEVE the difference in quality and sturdiness and fell in love with sewing again. Friend even got a serger, they got so into it after the Janome.
  • That said, Sew Sweetness started a huge business making bags on a basic Brother machine. Bags are tough to sew, and if she can make a mini empire on one, who’s to judge? I have bought, seriously, a half dozen or more of her patterns before she upgraded her machine.

Viking, Janome, Pfaff, Babylock, Juki…and all the other dealer brands not Bernina

  • Higher entry point than Brother, but not as high as Bernina
  • Dealer support/sales/deals and warranty options
  • Tons of variations in styles and reliability – read reviews. Ask the dealer pointblank: which machine gets returned/serviced the most?
  • Also in variations, some metal bodies, some plastic housing with metal inside in various amounts. For example, Janome has ~3 price levels and 3 different countries of manufacture for those levels.
  • Test drive them all even if it’s just because you can. They’re each so different and have their fans. I love Viking, Janome, and Juki. I know plenty of sewists that will fight to the death for their Pfaff. I have no experience with Pfaff or Babylock…I can’t know what I don’t know.
  • Accessories and parts are $$ and often brand-specific.
    • I have a 2012 Viking Sapphire 835. After an initial buy-in of +$1000, I have purchased:
      • invisible zipper foot
      • a quilting foot-set (see also: walking foot / differential feed foot, 1/4″ foot, AND darning foot)
      • ruffling foot
      • My Viking is hydraulic, which means no oil but also means I don’t work on it myself at this time. A single tune up is $180. It also means it does not like to ‘hand crank’ over tough spots.
      • extra Viking bobbins
  • ***EDITED perk I totally forgot! Dealers will throw in free lessons with a machine – so they’ll train you to use it and maybe even a beginner sewing class too! Work out a deal with them!

Garage Sale, Thrift Store, Hand-Me-Downs, or Craigslist

  • Do you know enough to look at it and know why it is for sale? If the power comes on, and the wheel turns freely by hand (toward you only, please), look at the bobbin area. In my experience, 90% of the issues are there, and 90% of THOSE are user-errors, but if you’re a beginner…those may soon be your errors.
  • $25 used sale price adds up if you’re wrong
  • Tune-up or a basic service to clean it is still likely to be $80-100, and that’s if you’re not wrong about why it’s for sale
  • Sometimes parts/accessories can be had cheaply on eBay, sometimes not so cheaply
  • ***edited*** you can find certified, warrantied machines at a dealer – if you do this, I highly recommend you negotiate an hour or more in classes/how to use said machine.

 

I say all of this, HOWEVER, in addition to my Viking and at the time of writing this, I have 9 used and/or vintage machines. 3 work flawlessly, 1 works mostly flawlessly, 5 are in various stages. 2 of the flawless, I bought working flawlessly (read: more than $25), the rest I’ve worked on/am working on. That said… 1 is a Janome and has 3 feet I’ve wanted but didn’t want to spend the money on for my Viking. I just got the 3 feet I wanted, on a 10+ year-old working Janome for $25, with a bit of elbow grease, and $10 for new bobbins. Those feet would have cost me at least $100 for my Viking.

BUT it did not start out that way. I am able to work and sew on old, mechanical sewing machines now because some years ago, my mom’s computerized, super-schmancy Janome (current comparable model is in the Memory Craft line) just let me sew something cool….AFTER I got frustrated on her 1970s Kenmore. Mom’s Kenmore is a 158 series – a machine you’re likely to find in the thrift stores and now one of my favorites. But then, I really just wanted to sew something cool and didn’t get that I needed to pay attention to a few mechanical details.

PART 2

Viking, Brother, and Bernina images owned by respective companies.